Product Introduction
The high-performance step-down MPPT wind solar complementary charging controller is a device that utilizes wind turbines and solar power to generate complementary high-performance output power. The wind turbine input adopts the MPPT (Maximum Power Point Tracking) algorithm. Fully utilize wind turbines to generate electricity and improve power generation efficiency. Due to the use of power conversion components, even if the fan voltage is within 0-450V, it can charge batteries with lower voltage levels (such as 12V/24V/36V/48V/96V, etc.). Internally equipped with fan unloading control components to ensure safe operation of the fan. A single unit is suitable for offline wind solar complementary power generation systems with a capacity of no more than 10KW. Multiple units can be used in parallel. Allow customers to configure freely and flexibly.
Performance characteristics
- Using industrial grade materials to ensure stable and reliable equipment operation
- The use of step-down power conversion components allows for flexible charging of different battery packs
- Wind turbine input MPPT tracking technology enables efficient power generation that conforms to the wind turbine curve
- The fan input current limiting function ensures that the fan can maintain uninterrupted power generation during strong winds without burning out the generator set
- Multiple devices can run in parallel, expanding their usage range and meeting the charging requirements under high power
- The photovoltaic input adopts a low loss charging method with high efficiency
| 型号 | 额定电池电压 | 风机输入电压 | 额定输出电流 | 适配风机 | 太阳能电流 | 太阳能功率 | 通讯接口 |
| MAX-A1-WSI-10 | 12V | 0-450V | 85A | 1KW | 40A | 500W | 485(选配) |
| MAX-A2-WSI-10 | 24V | 0-450V | 50A | 1KW | 40A | 1000W | 485(选配) |
| MAX-A3-WSI-10 | 36V | 0-450V | 30A | 1KW | 40A | 1500W | 485(选配) |
| MAX-A4-WSI-10 | 48V | 0-450V | 25A | 1KW | 40A | 2000W | 485(选配) |
| 2.0系列 | |||||||
| MAX-A2-WSI-20 | 24V | 0-450V | 85A | 2KW | 40A | 1000W | 485(选配) |
| MAX-A3-WSI-20 | 36V | 0-450V | 60A | 2KW | 40A | 1500W | 485(选配) |
| MAX-A4-WSI-20 | 48V | 0-450V | 45A | 2KW | 40A | 2000W | 485(选配) |
| MAX-A8-WSI-20 | 96V | 0-450V | 25A | 2KW | 40A | 4000W | 485(选配) |
| 3.0系列 | |||||||
| MAX-A2-WSI-30 | 24V | 0-450V | 130A | 3KW | 40A | 1000W | 485(选配) |
| MAX-A3-WSI-30 | 36V | 0-450V | 90A | 3KW | 40A | 1500W | 485(选配) |
| MAX-A4-WSI-30 | 48V | 0-450V | 70A | 3KW | 40A | 2000W | 485(选配) |
| MAX-A8-WSI-30 | 96V | 0-450V | 40A | 3KW | 40A | 4000W | 485(选配) |
| 5.0系列 | |||||||
| MAX-A2-WSI-50 | 24V | 0-450V | 220A | 5KW | 40A | 1000W | 485(选配) |
| MAX-A3-WSI-50 | 36V | 0-450V | 150A | 5KW | 40A | 1500W | 485(选配) |
| MAX-A4-WSI-50 | 48V | 0-450V | 110A | 5KW | 40A | 2000W | 485(选配) |
| MAX-A8-WSI-50 | 96V | 0-450V | 60A | 5KW | 40A | 4000W | 485(选配) |
| MAX-A8-WSI-100 | 96V | 0-450V | 120A | 10KW | 40A | 4000W | 485(选配) |
| 保护方式 | 蓄电池过充，太阳能反接，电池反接，风机限流，限功率，卸荷刹车，输入雷击 | ||||||
| 显示方式 | 128*64液晶显示 | ||||||
| 工作性能 | 风机至大功率点跟踪/太阳能低损耗充电 | ||||||
| 卸荷方式 | 风机无级PWM卸荷/太阳能开路卸荷 | ||||||
| 工作环境 | -20~60度/35~85%RH(不结露) | ||||||
| 尺寸 | 控制器尺寸（长X宽X高）：415mm *350mm *150mm 卸荷箱尺寸（长X宽X高）：420mm* 375mm* 173mm | ||||||